R21xx-HP FlexFabric 11900 MPLS Command Reference

105
Views
VPN instance view
Predefined user roles
network-admin
Usage guidelines
In IPv4 VPN view, you can configure IPv4 VPN parameters including inbound and outbound routing
policies.
Examples
# Enter IPv4 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] ipv4-family
[Sysname-vpn-ipv4-vpn1]
Related commands
ipv6-family(VPN instance view)
ipv4-family vpnv4
Use ipv4-family vpnv4 to enter BGP VPNv4 address family view or BGP-VPN VPNv4 address family
view.
Use undo ipv4-family vpnv4 to remove all settings from BGP VPNv4 address family view or BGP-VPN
VPNv4 address family view.
Syntax
ipv4-family vpnv4
undo ipv4-family vpnv4
Views
BGP view, BGP-VPN view
Predefined user roles
network-admin
Usage guidelines
A VPNv4 address comprises an RD and an IPv4 prefix. VPNv4 routes comprise VPNv4 addresses.
For a PE to exchange BGP VPNv4 routes with a BGP peer, you must enable that peer by executing the
peer enable command in BGP VPNv4 address family view or BGP-VPN VPNv4 address family view.
In BGP VPNv4 address family view, you can configure BGP VPNv4 route attributes, such as the preferred
value, and whether to allow the local AS number to appear in the AS_PATH attribute of received route
updates.
The settings in BGP VPNv4 address family view control VPNv4 route exchange between PEs.
The settings in BGP-VPN VPNv4 address family view control VPNv4 route exchange between provider PE
and provider CE in nested MPLS L3VPN.