R21xx-HP FlexFabric 11900 MPLS Command Reference

120
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.2 600 0 0 0 0 00:00:22 Idle
Table 41 Command output
Field Descri
p
tion
BGP peer-group Name of the BGP peer group.
Remote AS AS number of the peer group.
Type
Type of the BGP peer group:
• External—EBGP peer group.
• Internal—IBGP peer group.
Maximum number of prefixes allowed
Maximum number of routes that can be learned from
the peer group.
Threshold
Warning threshold. When the percentage of received
route prefixes to the maximum number of routes
reaches this threshold, the device generates a prompt.
Configured hold time Configured hold time in seconds.
Keepalive time Keepalive interval in seconds.
Minimum time between advertisements Minimum time between advertisements.
Peer Preferred Value Preferred value for routes received from the peer.
Routing policy configured Routing policy configured for the peer group.
Members Peers in the peer group.
Peer IPv4 address of the peer.
AS AS number of the peer group.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration of the BGP session in the current state.
State State of the peer.
display bgp peer vpnv6
Use display bgp peer vpnv6 to display information about BGP VPNv6 peers.
Syntax
display bgp peer vpnv6 [ group-name log-info | ip-address { log-info | verbose } | verbose ]
Views
Any view