R21xx-HP FlexFabric 11900 MPLS Command Reference
Table Of Contents
- Title Page
- Contents
- MCE commands
- description
- display bgp group ipv4 vpn-instance
- display bgp peer ipv4 vpn-instance
- display ip vpn-instance
- domain-id
- export route-policy
- ext-community-type
- import route-policy
- ip binding vpn-instance
- ip vpn-instance
- ipv4-family
- route-distinguisher
- route-tag
- routing-table limit
- vpn-instance-capability simple
- vpn-target
- IPv6 MCE commands
- Basic MPLS commands
- Static LSP commands
- LDP commands
- accept-label
- advertise-label
- backoff
- display mpls ldp discovery
- display mpls ldp fec
- display mpls ldp interface
- display mpls ldp lsp
- display mpls ldp parameter
- display mpls ldp peer
- display mpls ldp summary
- graceful-restart
- graceful-restart timer
- label-distribution
- loop-detect
- lsp-trigger
- lsr-id
- maxhops
- md5-authentication
- mpls ldp
- mpls ldp enable
- mpls ldp timer
- mpls ldp transport-address
- pv-limit
- reset mpls ldp
- session protection
- targeted-peer
- vpn-instance
- Tunnel policy commands
- MPLS L3VPN commands
- description (VPN instance view)
- display bgp group vpnv4
- display bgp peer vpnv4
- display bgp routing-table ipv4 unicast inlabel
- display bgp routing-table ipv4 unicast outlabel
- display bgp routing-table vpnv4
- display bgp routing-table vpnv4 advertise-info
- display bgp routing-table vpnv4 as-path-acl
- display bgp routing-table vpnv4 community-list
- display bgp routing-table vpnv4 inlabel
- display bgp routing-table vpnv4 outlabel
- display bgp routing-table vpnv4 peer
- display bgp routing-table vpnv4 statistics
- display ip vpn-instance
- domain-id
- export route-policy
- ext-community-type
- import route-policy
- ip binding vpn-instance
- ip vpn-instance (system view)
- ipv4-family (VPN instance view)
- ipv4-family vpnv4
- nesting-vpn
- peer next-hop-invariable
- peer upe
- peer upe route-policy
- policy vpn-target
- refresh bgp vpnv4
- reset bgp vpnv4
- route-distinguisher (VPN instance view)
- route-tag
- routing-table limit
- rr-filter
- tnl-policy (VPN instance view/IPv4 VPN view/IPv6 VPN view)
- vpn popgo
- vpn-target (VPN instance view/IPv4 VPN view/IPv6 VPN view)
- IPv6 MPLS L3VPN commands
- display bgp group vpnv6
- display bgp peer vpnv6
- display bgp routing-table vpnv6
- display bgp routing-table vpnv6 advertise-info
- display bgp routing-table vpnv6 as-path-acl
- display bgp routing-table vpnv6 community-list
- display bgp routing-table vpnv6 inlabel
- display bgp routing-table vpnv6 outlabel
- display bgp routing-table vpnv6 peer
- display bgp routing-table vpnv6 statistics
- ipv6-family (VPN instance view)
- ipv6-family vpnv6
- policy vpn-target
- refresh bgp vpnv6
- reset bgp vpnv6
- rr-filter
- MPLS L2VPN commands
- VPLS commands
- backup-peer
- description
- display l2vpn ldp
- display l2vpn forwarding
- display l2vpn mac-address
- display l2vpn pw
- display l2vpn pw-class
- display l2vpn service-instance
- display l2vpn vsi
- encapsulation
- l2vpn enable
- l2vpn switchover
- mac-learning enable
- mtu
- peer
- pw-class
- pw-type
- pwsignaling
- reset l2vpn mac-address
- revertive
- service-instance
- shutdown
- vsi
- xconnect vsi
- Support and other resources
- Index
155
Usage guidelines
You must enable L2VPN before configuring other L2VPN settings.
Examples
# Enable L2VPN.
<Sysname> system-view
[Sysname] l2vpn enable
l2vpn switchover
Use l2vpn switchover to switch traffic from the specified PW to its backup or primary PW.
Syntax
l2vpn switchover peer ip-address pw-id pw-id
Views
User view
Predefined user roles
network-admin
Parameters
peer ip-address: Specifies the LSR ID of the peer PE on the PW that must be in up state.
pw-id pw-id: Specifies a PW by its ID in the range of 1 to 4294967295.
Usage guidelines
The specified LSR ID and PW ID uniquely identify the PW.
If the specified PW has a backup PW or primary PW, this command switches traffic from the PW to the
backup or primary PW. If the PW does not have a backup or primary PW, this command does not
perform the switchover.
Examples
#Switch traffic from PW 100 destined for 3.3.3.3 to its backup PW.
<Sysname> l2vpn switchover peer 3.3.3.3 pw-id 100
mtu
Use mtu to configure an MTU for a cross-connect.
Use undo mtu to restore the default.
Syntax
mtu mtu
undo mtu
Default
A cross-connect has an MTU of 1500 bytes.
Views
Cross-connect view