R21xx-HP FlexFabric 11900 MPLS Command Reference
Table Of Contents
- Title Page
- Contents
- MCE commands
- description
- display bgp group ipv4 vpn-instance
- display bgp peer ipv4 vpn-instance
- display ip vpn-instance
- domain-id
- export route-policy
- ext-community-type
- import route-policy
- ip binding vpn-instance
- ip vpn-instance
- ipv4-family
- route-distinguisher
- route-tag
- routing-table limit
- vpn-instance-capability simple
- vpn-target
- IPv6 MCE commands
- Basic MPLS commands
- Static LSP commands
- LDP commands
- accept-label
- advertise-label
- backoff
- display mpls ldp discovery
- display mpls ldp fec
- display mpls ldp interface
- display mpls ldp lsp
- display mpls ldp parameter
- display mpls ldp peer
- display mpls ldp summary
- graceful-restart
- graceful-restart timer
- label-distribution
- loop-detect
- lsp-trigger
- lsr-id
- maxhops
- md5-authentication
- mpls ldp
- mpls ldp enable
- mpls ldp timer
- mpls ldp transport-address
- pv-limit
- reset mpls ldp
- session protection
- targeted-peer
- vpn-instance
- Tunnel policy commands
- MPLS L3VPN commands
- description (VPN instance view)
- display bgp group vpnv4
- display bgp peer vpnv4
- display bgp routing-table ipv4 unicast inlabel
- display bgp routing-table ipv4 unicast outlabel
- display bgp routing-table vpnv4
- display bgp routing-table vpnv4 advertise-info
- display bgp routing-table vpnv4 as-path-acl
- display bgp routing-table vpnv4 community-list
- display bgp routing-table vpnv4 inlabel
- display bgp routing-table vpnv4 outlabel
- display bgp routing-table vpnv4 peer
- display bgp routing-table vpnv4 statistics
- display ip vpn-instance
- domain-id
- export route-policy
- ext-community-type
- import route-policy
- ip binding vpn-instance
- ip vpn-instance (system view)
- ipv4-family (VPN instance view)
- ipv4-family vpnv4
- nesting-vpn
- peer next-hop-invariable
- peer upe
- peer upe route-policy
- policy vpn-target
- refresh bgp vpnv4
- reset bgp vpnv4
- route-distinguisher (VPN instance view)
- route-tag
- routing-table limit
- rr-filter
- tnl-policy (VPN instance view/IPv4 VPN view/IPv6 VPN view)
- vpn popgo
- vpn-target (VPN instance view/IPv4 VPN view/IPv6 VPN view)
- IPv6 MPLS L3VPN commands
- display bgp group vpnv6
- display bgp peer vpnv6
- display bgp routing-table vpnv6
- display bgp routing-table vpnv6 advertise-info
- display bgp routing-table vpnv6 as-path-acl
- display bgp routing-table vpnv6 community-list
- display bgp routing-table vpnv6 inlabel
- display bgp routing-table vpnv6 outlabel
- display bgp routing-table vpnv6 peer
- display bgp routing-table vpnv6 statistics
- ipv6-family (VPN instance view)
- ipv6-family vpnv6
- policy vpn-target
- refresh bgp vpnv6
- reset bgp vpnv6
- rr-filter
- MPLS L2VPN commands
- VPLS commands
- backup-peer
- description
- display l2vpn ldp
- display l2vpn forwarding
- display l2vpn mac-address
- display l2vpn pw
- display l2vpn pw-class
- display l2vpn service-instance
- display l2vpn vsi
- encapsulation
- l2vpn enable
- l2vpn switchover
- mac-learning enable
- mtu
- peer
- pw-class
- pw-type
- pwsignaling
- reset l2vpn mac-address
- revertive
- service-instance
- shutdown
- vsi
- xconnect vsi
- Support and other resources
- Index
182
undo peer ip-address pw-id pw-id
Default
No PW is configured for VPLS.
Views
VSI LDP view, VSI static view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the LSR ID of the peer PE.
pw-id pw-id: Specifies a PW ID for the PW, in the range of 1 to 4294967295.
in-label label-value: Specifies the incoming label of the PW, in the range of 16 to 1023.
out-label label-value: Specifies the outgoing label of the PW, in the range of 16 to 1023.
no-split-horizon: Disable split horizon forwarding for the PW. By default, a PW must use the split horizon
forwarding scheme to forward packets.
pw-class class-name: Specifies a PW class by its name, a case-sensitive string of 1 to 19 characters. If no
PW class is specified, the PW type is VLAN and the PW does not support control word.
tunnel-policy tunnel-policy-name: Specifies a tunnel policy by its name, a case-insensitive string of 1 to
19 characters. If no tunnel policy is specified, the PW uses the default tunnel policy.
Usage guidelines
To create a static PW, you must specify the incoming and outgoing labels. To enter VSI static PW view of
an existing static PW, you do not need to specify the incoming and outgoing labels.
A PW ID identifies a PW between two PEs. The PW ID for a PW must be the same on the PEs at the ends
of the PW.
On a PE, the LSR ID of the peer PE and the PW ID uniquely identify a PW, and must not be both the same
as those of any VPLS PW or cross-connect PW.
Examples
# Configure an LDP PW for the VSI vpn1 and enter VSI LDP PW view: specify the peer PE address as
4.4.4.4, set the PW ID to 200, and disable split horizon forwarding for the PW.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling ldp
[Sysname-vsi-vpn1-ldp] peer 4.4.4.4 pw-id 200 no-split-horizon
[Sysname-vsi-vpn1-ldp-4.4.4.4-200]
# Configure a static PW for the VSI vpn1 and enter VSI static PW view: specify the peer PE address as
5.5.5.5, set the PW ID to 200, incoming label to 100, and outgoing label to 200, and disable split
horizon forwarding for the PW.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling static
[Sysname-vsi-vpn1-static] peer 5.5.5.5 pw-id 200 in-label 100 out-label 200
no-split-horizon
[Sysname-vsi-vpn1-static-5.5.5.5-200]