R21xx-HP FlexFabric 11900 MPLS Command Reference

185
Use undo pwsignaling to remove the specified PW signaling protocol for a VSI.
Syntax
pwsignaling { ldp | static }
undo pwsignaling { ldp | static }
Default
No PW signaling protocol is specified for a VSI.
Views
VSI view
Predefined user roles
network-admin
Parameters
ldp: Establishes PWs through LDP. (Martini mode.)
static: Establishes PWs statically.
Usage guidelines
You can configure both static and LDP PWs in the same VSI.
Examples
# Configure the VSI vpn1 to use LDP to establish PWs, and enter VSI LDP view.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] pwsignaling ldp
[Sysname-vsi-vpn1-ldp]
Related commands
display l2vpn pw
reset l2vpn mac-address
Use reset l2vpn mac-address to clear MAC address entries for VSIs.
Syntax
reset l2vpn mac-address [ vsi vsi-name ]
Views
User view
Predefined user roles
network-admin
Parameters
vsi vsi-name: Clears MAC address entries for the VSI specified by its name, a case-sensitive string of 1
to 31 characters. If no VSI is specified, the command clears MAC address entries for all VSIs.