R21xx-HP FlexFabric 11900 MPLS Command Reference

35
Table 16 Command output
Field Descri
p
tion
Memory State
Memory state:
• Normal—The memory is normal.
• Minor—The memory has a minor alarm.
• Severe—The memory has a severe alarm.
• Critical—The memory has a critical alarm.
Egress Label Type
Label type that the egress assigns to the penultimate hop:
• Implicit-null.
• Explicit-null.
• Non-null.
Labels Label information.
Range Label range.
Idle Number of idle labels in the label range.
Protocols Running label distribution protocols and the related information.
Type Protocol type: LDP, BGP, or Static.
State
Label distribution protocol running status:
• Normal.
• Recover—The protocol is in the GR process.
mpls enable
Use mpls enable to enable MPLS on an interface.
Use undo mpls enable to disable MPLS on an interface.
Syntax
mpls enable
undo mpls enable
Default
MPLS is disabled on an interface.
Views
Layer 3 Ethernet interface view, VLAN interface view
Predefined user roles
network-admin
Usage guidelines
Execute this command on all interfaces that need to perform MPLS forwarding.
Examples
# Enable MPLS on interface VLAN-interface 2.
<Sysname> System-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] mpls enable