R21xx-HP FlexFabric 11900 MPLS Command Reference

41
undo static-lsp egress lsp-name
Default
No static LSP exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a name for the static LSP, a case-sensitive string of 1 to 15 characters.
in-label in-label: Specifies an incoming label in the range of 16 to 1023.
Examples
# Configure a static LSP on the egress node: specify the LSP's name as bj-sh and incoming label as 233.
<Sysname> system-view
[Sysname] static-lsp egress bj-sh in-label 233
Related commands
display mpls static-lsp
static-lsp ingress
Use static-lsp ingress to configure the ingress node of a static LSP.
Use undo static-lsp ingress to delete the ingress node configuration for a static LSP.
Syntax
static-lsp ingress lsp-name destination dest-addr { mask | mask-length } nexthop next-hop-addr out-label
out-label
undo static-lsp ingress lsp-name
Default
No static LSP exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a name for the static LSP, a case-sensitive string of 1 to 15 characters.
destination dest-addr: Specifies a destination IP address for the LSP.
mask: Specifies the mask of the destination IP address.
mask-length: Specifies the mask length of the destination address, in the range of 0 to 32.
nexthop next-hop-addr: Specifies a next hop address.
out-label out-label: Specifies an outgoing label in the range of 16 to 1023.