R21xx-HP FlexFabric 11900 MPLS Command Reference

74
Related commands
display mpls ldp peer
targeted-peer
Use targeted-peer to allow sending Targeted Hellos to and receiving Targeted Hellos from the specified
peer, and to enter LDP peer view.
Use undo targeted-peer to cancel the configuration.
Syntax
targeted-peer peer-lsr-id
undo targeted-peer peer-lsr-id
Default
The device does not send Targeted Hellos to or receive Targeted Hellos from any peer.
Views
LDP view
Predefined user roles
network-admin
Parameters
peer-lsr-id: Specifies the LSR ID of a peer.
Examples
# Configure the device to send Targeted Hellos to the peer 3.3.3.3, and enter LDP peer view.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-ldp] targeted-peer 3.3.3.3
[Sysname-ldp-peer-3.3.3.3]
Related commands
• display mpls ldp discovery
• display mpls ldp peer
vpn-instance
Use vpn-instance to enable LDP for a VPN instance and enter LDP-VPN instance view.
Use undo vpn-instance to delete the LDP-VPN instance.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance vpn-instance-name
Default
LDP is disabled for a VPN instance.
Views
LDP view