R21xx-HP FlexFabric 11900 MPLS Configuration Guide

192
Task Command Remarks
Display FIB entries that match the
specified destination IP address in
the specified VPN instance.
display ipv6 fib vpn-instance
vpn-instance-name ipv6-address
[ prefix-length ]
Available in any view.
Display BGP VPNv6 peer group
information.
display bgp group vpnv6 [ group-name ] Available in any view.
Display BGP VPNv6 peer
information.
display bgp peer vpnv6 [ group-name
log-info | ip-address { log-info | verbose } |
verbose ]
Available in any view.
Display BGP VPNv6 routes.
display bgp routing-table vpnv6
[ route-distinguisher route-distinguisher ]
[ network-address prefix-length ]
Available in any view.
Display BGP VPNv6 route
advertisement information.
display bgp routing-table vpnv6
network-address prefix-length advertise-info
Available in any view.
Display BGP VPNv6 routes
matching the specified AS PATH
list.
display bgp routing-table vpnv6
[ route-distinguisher route-distinguisher ]
as-path-acl as-path-acl-number
Available in any view.
Display BGP VPNv6 routes
matching the specified BGP
community list.
display bgp routing-table vpnv6
[ route-distinguisher route-distinguisher ]
community-list
{ { basic-community-list-number |
comm-list-name } [ whole-match ] |
adv-community-list-number }
Available in any view.
Display BGP VPNv6 routes
advertised to or received from the
specified BGP peer.
display bgp routing-table vpnv6 peer
ip-address { advertised-routes |
received-routes } [ network-address
prefix-length | statistics ]
Available in any view.
Display incoming labels for all BGP
VPNv6 routes.
display bgp routing-table vpnv6 inlabel Available in any view.
Display outgoing labels for all BGP
VPNv6 routes.
display bgp routing-table vpnv6 outlabel Available in any view.
Display BGP VPNv6 route
statistics.
display bgp routing-table vpnv6 statistics Available in any view.
IPv6 MPLS L3VPN configuration examples
Configuring IPv6 MPLS L3VPNs
Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 111:1. VPN 2 uses route target attributes 222:2. Users of different VPNs
cannot access each other.
Run EBGP between CE and PE switches to exchange VPN routing information.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing information.