R21xx-HP FlexFabric 11900 MPLS Configuration Guide

232
Ste
p
Command Remarks
8. Manually switch traffic to the
backup PW of the specified
PW.
l2vpn switchover peer ip-address
pw-id pw-id
N/A
Displaying and maintaining MPLS L2VPN
Task Command Remarks
Display LDP PW label information.
display l2vpn ldp [ peer ip-address [ pw-id
pw-id ] | xconnect-group group-name ]
[ verbose ]
Available in any view.
Display cross-connect forwarding
information (in standalone mode).
display l2vpn forwarding { ac | pw }
[ xconnect-group group-name ] [ slot
slot-number ] [ verbose ]
Available in any view.
Display cross-connect forwarding
information (in IRF mode).
display l2vpn forwarding { ac | pw }
[ xconnect-group group-name ] [ chassis
chassis-number slot slot-number ] [ verbose ]
Available in any view.
Display L2VPN information for the
Layer 3 interface bound to a
cross-connect.
display l2vpn interface [ xconnect-group
group-name | interface-type
interface-number ]
Available in any view.
Display L2VPN PW information.
display l2vpn pw [ xconnect-group
group-name ] [ ldp | static ] [ verbose ]
Available in any view.
Display PW class information. display l2vpn pw-class [ class-name ] Available in any view.
Display service instance
information.
display l2vpn service-instance [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ verbose ]
Available in any view.
Display cross-connect group
information.
display l2vpn xconnect-group [ name
group-name ] [ verbose ]
Available in any view.
MPLS L2VPN configuration examples
Configuring a static PW
Network requirements
Create a static PW between PE 1 and PE 2 over the backbone so CE 1 and CE 2 can communicate
within VLAN 10.