R21xx-HP FlexFabric 11900 MPLS Configuration Guide

253
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 2 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer PW ID In/Out Label Proto Flag Link ID State
192.2.2.2 1000 65669/65655 LDP M 0 Up
192.3.3.3 1000 100/200 Static M 1 Up
# Display L2VPN PW information on PE 1. The output shows that a PW has been created.
[PE1] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer PW ID In/Out Label Proto Flag Link ID State
192.4.4.4 1000 65655/65669 LDP M 1 Up
# Display L2VPN PW information on PE 2. The output shows that a PW has been created.
[PE2] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer PW ID In/Out Label Proto Flag Link ID State
192.4.4.4 1000 200/100 Static M 1 Up
# CE 1 and CE 2 can ping each other.
[CE1] ping 100.1.1.2
56 bytes from 100.1.1.2: icmp_seq=0 ttl=255 time=7.000 ms
56 bytes from 100.1.1.2: icmp_seq=1 ttl=255 time=3.000 ms
56 bytes from 100.1.1.2: icmp_seq=2 ttl=255 time=3.000 ms
56 bytes from 100.1.1.2: icmp_seq=3 ttl=255 time=3.000 ms
56 bytes from 100.1.1.2: icmp_seq=4 ttl=255 time=3.000 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/stddev = 3.000/3.800/7.000/1.600 ms
Configuring an inter-domain multi-segment PW
Network requirements
Configure an inter-domain multi-segment PW between PE 1 and PE 2 in different ASs, so CE 1 and CE
2 can communicate over the backbone.