R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

102
[Sysname] snmp-agent usm-user v2c userv2c readCom acl 2001
Related commands
• display snmp-agent community
• snmp-agent community
• snmp-agent group
snmp-agent usm-user v3
Use snmp-agent usm-user v3 to add a user to an SNMPv3 group.
Use undo snmp-agent usm-user v3 to delete a user from an SNMPv3 group.
Syntax
In non-FIPS mode:
snmp-agent usm-user v3 user-name group-name [ remote { ip-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode { md5 | sha }
auth-password [ privacy-mode { aes128 | des56 } priv-password ] ] [ acl acl-number | acl ipv6
ipv6-acl-number ] *
undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string | remote
{ ip-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
In FIPS mode:
snmp-agent usm-user v3 user-name group-name [ remote { ip-address | ipv6 ipv6-address }
[ vpn
-instance vpn-instance-name ] [ { cipher | simple } authentication-mode sha auth-password
[ privacy-mode aes128 priv-password ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string | remote
{ ip-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] }
Default
No SNMPv3 users have been configured.
Views
System view
Predefined user roles
network-admin
Parameters
user-name: Specifies an SNMPv3 username, a case-sensitive string of 1 to 32 characters.
group-name: Specifies an SNMPv3 group name, a case-sensitive string of 1 to 32 characters.
remote { ip-address | ipv6 ipv6-address }: Specifies the IPv4 or IPv6 address of the remote SNMP entity.
To send SNMPv3 informs to an NMS, you must specify the IPv4 or IPv6 address of the NMS in the
snmp-agent usm-user v3 command and map the IPv4 or IPv6 address to the SNMP engine ID of the
NMS by using the snmp-agent remote command.
vpn-instance vpn-instance-name: Specifies the VPN for the target host receiving SNMP notifications. The
vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31
characters. If this parameter is not specified, the target host is in public network.