R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

108
Examples
# Configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
destination ip
Use destination ip to configure the destination IP address for the operation.
Use undo destination ip to remove the destination IP address.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IP address is configured for the operation.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address for the operation.
Examples
# Configure the destination IP address for the ICMP echo operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1
destination port
Use destination port to configure the destination port number for the operation.
Use undo destination port to remove the destination port number.
Syntax
destination port port-number
undo destination port
Default
No destination port number is configured for the operation.
Views
UDP echo operation view