R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

113
network-operator
Parameters
admin-name operation-tag: Displays the statistics for an NQA operation. The admin-name argument
represents the name of the administrator who creates the NQA operation, and is a case-insensitive string
of 1 to 32 characters. The operation-tag argument represents the operation tag, and is a case-insensitive
string of 1 to 32 characters. If these two arguments are not specified, the command displays statistics for
all NQA operations.
Usage guidelines
The statistics are generated after the NQA operation completes. If you execute the display nqa statistics
command before the operation completes, the statistics are displayed as all 0s.
If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the
period specified by the statistics internal command. If the threshold type is average value, the result fields
display hyphens (-).
Examples
# Display the statistics for the UDP echo operation.
<Sysname> display nqa statistics admin test
NQA entry (admin admin, tag test) test statistics:
NO. : 1
Destination IP address: 192.168.0.58
Start time: 2011-01-01 05:59:14.5
Life time: 19 seconds
Send operation times: 184 Receive response times: 184
Min/Max/Average round trip time: 2/44/4
Square-Sum of round trip time: 9117
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
Reaction statistics:
Index Checked Element Threshold Type Checked Num Over-threshold Num
1 probe-failure consecutive 184 0
Table 33 Command output
Field Descri
p
tion
No. Statistics group ID.
Start time Time when the operation started.
Life time Duration of the operation in seconds.
Send operation times Number of probe packets sent.
Receive response times Number of response packets received.
Min/Max/Average round trip time Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time Square sum of round-trip time.
Packet loss in test Average packet loss ratio.