R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

120
Specify a lifetime long enough for an operation to complete.
Examples
# Schedule the operation with the administrator name admin and operation tag test to start on 08:08:08
2008/08/08 and last 1000 seconds.
<Sysname> system-view
[Sysname] nqa schedule admin test start-time 08:08:08 2008/08/08 lifetime 1000 recurring
Related commands
• destination ip
• nqa entry
• type
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
times: Specifies the probe times in the range of 1 to 15.
Usage guidelines
An ICMP echo or UDP echo operation sends an ICMP echo request or a UDP packet.
If an operation is to perform multiple probes, the system starts the next probe when it receives responses
to packets sent in the first probe, or when the probe timeout time expires.
Examples
# Configure the ICMP echo operation to perform 10 probes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] probe count 10
probe timeout
Use probe timeout to specify the probe timeout time.
Use undo probe timeout to restore the default.