R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

121
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
timeout: Specifies the probe timeout time in milliseconds. The available value ranges include:
• 10 to 86400000 for the FTP or HTTP operation.
• 10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, or UDP echo operation.
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time for the DHCP operation to 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
reaction checked-element probe-duration
Use reaction checked-element probe-duration to configure a reaction entry for monitoring the probe
duration.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element probe-duration threshold-type { accumulate
accumulate-occurrences | average | consecutive consecutive-occurrences } threshold-value
upper-threshold lower-threshold [ action-type none ]
undo reaction item-number
Default
No reaction entry for monitoring the probe duration is configured.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.