R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

7
--- 2001::2 ping6 statistics ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.000/25.000/62.000/20.000 ms
The output shows that:
• The destination is reachable, and ICMPv6 echo requests are replied.
• The minimum/average/maximum/standard deviation roundtrip time of packets is 4 milliseconds,
25 milliseconds, 62 milliseconds and 20 milliseconds.
Table 2 Command output
Field Descri
p
tion
PING6(104=40+8+56 bytes)
2001::1 --> 2001::2, press CTRL_C to
break
A 104-byte ICMPv6 echo reply is sent from 2001::1to 2001::2.
• The length of IPv6 packet header is 40 bytes.
• The length of ICMPv6 packet header is 8 bytes.
• The length of the ICMPv6 echo request is 56 bytes.
Press Ctrl+C to abort the ping IPv6 operation.
56 bytes from 2001::2,
icmp_seq=1 hlim=64 dst=2001::1
idx=3 time=62.000 ms
Received ICMPv6 echo replies from the device whose IPv6 address is
2001::2.
• The number of data bytes is 56.
• The packet sequence is 1.
• The hop limit value is 64.
• The destination address is 2001::1. Specify the -v keyword to
display this field.
• The index for the packet inbound interface is 3. Specify the -v
keyword to display this field.
• The response time is 62 milliseconds.
--- 2001::2 ping6 statistics --- Statistics on data received and sent in the ping operation.
5 packet(s) transmitted Number of ICMPv6 echo requests sent.
5 packet(s) received Number of ICMPv6 echo replies received.
0.0% packet loss Percentage of packets not responded to the total packets sent.
round-trip min/avg/max/ std-dev
=4.000/25.000/62.000/20.000
ms
Minimum/average/maximum/standard deviation response time, in
milliseconds.
tracert
Use tracert to trace the path the packets traverse from source to destination.
Syntax
tracert [ -a source-ip | -f first-ttl | -m max-ttl | -p port | -q packet-number | -vpn-instance
vpn-instance-name | -w timeout ] * host
Views
Any view
Predefined user roles
network-admin