R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

125
Examples
# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is
triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
Track (High Availability Command Reference)
route-option bypass-route
Use route-option bypass-route to enable the routing table bypass function to test the connectivity to the
direct destination.
Use undo route-option bypass-route to disable the routing table bypass function.
Syntax
route-option bypass-route
undo route-option bypass-route
Default
The routing table bypass function is disabled.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Usage guidelines
When the routing table bypass function is enabled, the routing table is not searched, and packets are
sent directly to the destination in a directly connected network.
Examples
# Enable the routing table bypass function.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] route-option bypass-route
source interface
Use source interface to configure the source interface for ICMP echo request packets.
Use undo source interface to restore the default.
Syntax
source interface interface-type interface-number
undo source interface