R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

164
Parameters
job job-id: Specifies a process by its job ID in the range of 1 to 2147483647.
size memory-size: Specifies the memory block size in the range of 1 to 4294967295.
offset offset-size: Specifies an offset in the range of 0 to 4294967295. The default value is 128. For
example, suppose the system allocates 100 16-byte memory blocks to process job 1, and the process has
used 66 blocks. Then if you execute the display process memory heap job 1 size 16 offset 50 command,
the output shows the addresses of the 51
st
through 66
th
16-byte blocks used by the process.
slot slot-number: Specifies a card by its slot number. Without this option, the command displays block
address information on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Without this option,
the command displays block address information on the global active MPU. (In IRF mode.)
Usage guidelines
This command displays memory block addresses in hexadecimal format. To view memory block content,
execute the display process memory heap address command.
Examples
# Display the addresses of 16-byte memory blocks used by process job 1.
<Sysname> display process memory heap job 1 size 16
0xb7e300c0 0xb7e300d0 0xb7e300e0 0xb7e300f0
0xb7e30100 0xb7e30110 0xb7e30120 0xb7e30130
0xb7e30140 0xb7e30150 0xb7e30160 0xb7e30170
0xb7e30180 0xb7e30190 0xb7e301a0 0xb7e301b0
0xb7e301c0 0xb7e301d0 0xb7e301e0 0xb7e301f0
0xb7e30200 0xb7e30210 0xb7e30220 0xb7e30230
# Display the addresses of 16-byte memory blocks starting from the fifth block used by process job 1.
<Sysname> display process memory heap job 1 size 16 offset 4
0xb7e30100 0xb7e30110 0xb7e30120 0xb7e30130
0xb7e30140 0xb7e30150 0xb7e30160 0xb7e30170
0xb7e30180 0xb7e30190 0xb7e301a0 0xb7e301b0
0xb7e301c0 0xb7e301d0 0xb7e301e0 0xb7e301f0
0xb7e30200 0xb7e30210 0xb7e30220 0xb7e30230
Related commands
• display process memory heap
• display process memory heap address
monitor kernel deadloop enable
Use monitor kernel deadloop enable to enable kernel thread deadloop detection.
Use undo monitor kernel deadloop enable to disable kernel thread deadloop detection.
Syntax
In standalone mode:
monitor kernel deadloop enable [ slot slot-number ]
undo monitor kernel deadloop enable [ slot slot-number ]