R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

169
Syntax
In standalone mode:
monitor kernel starvation exclude-thread tid [ slot slot-number ]
undo monitor kernel starvation exclude-thread [ tid ] [ slot slot-number ]
In IRF mode:
monitor kernel starvation exclude-thread tid [ chassis chassis-number slot slot-number ]
undo monitor kernel starvation exclude-thread [ tid ] [ chassis chassis-number slot slot-number ]
Default
Kernel thread starvation detection, if enabled, monitors all kernel threads.
Views
System view
Predefined user roles
network-admin
Parameters
tid: Specifies a kernel thread by its ID in the range of 1 to 2147483647. If no kernel thread is specified
for the undo command, the default is restored.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (In IRF mode.)
Usage guidelines
You can disable kernel thread starvation detection for up to 128 kernel threads by executing the
command.
Inappropriate use of this command can cause service problems or system breakdown. Make sure you
understand the impact of this command on your network before you use it.
Examples
# Disable kernel thread starvation detection for kernel thread 15.
<Sysname> system-view
[Sysname] monitor kernel starvation exclude-thread 15
Related commands
• display kernel starvation
• display kernel starvation configuration
• monitor kernel starvation time
• monitor kernel starvation enable
monitor kernel starvation time
Use monitor kernel starvation time to set the interval for identifying a kernel thread starvation.
Use undo monitor kernel starvation time to restore the default.