R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

170
Syntax
In standalone mode:
monitor kernel starvation time interval [ slot slot-number ]
undo monitor kernel starvation time [ slot slot-number ]
In IRF mode:
monitor kernel starvation time interval [ chassis chassis-number slot slot-number ]
undo monitor kernel starvation time [ chassis chassis-number slot slot-number ]
Default
The interval for identifying a kernel thread starvation is 120 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time interval: Specifies the interval for identifying a kernel thread starvation, in the range of 1 to 65535
seconds.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (In IRF mode.)
Usage guidelines
If a thread is not executed within the specified interval, the system considers that a starvation has
occurred, and outputs a starvation message.
Inappropriate use of this command can cause service problems or system breakdown. Make sure you
understand the impact of this command on your network before you use it.
Examples
# Set the interval for identifying a kernel thread starvation to 120 seconds.
<Sysname> system-view
[Sysname] monitor kernel starvation time 120
Related commands
• display kernel starvation
• display kernel starvation configuration
• monitor kernel starvation enable
• monitor kernel starvation exclude-thread
monitor process
Use monitor process to display process statistics.
Syntax
In standalone mode: