R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

184
mirroring-group mirroring-cpu
Use mirroring-group mirroring-cpu to configure source CPUs for a mirroring group.
Use undo mirroring-group mirroring-cpu to remove source CPUs from the mirroring group.
Syntax
In standalone mode:
mirroring-group group-id mirroring-cpu slot slot-number-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-cpu slot slot-number-list
In IRF mode:
mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list { both | inbound |
outbound }
undo mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list
Default
No source CPU is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Specifies the mirroring group ID in the range of 1 to 4. The mirroring group specified by the
group-id argument must already exist.
slot slot-number-list: Specifies a slot number list of cards that hold the source CPUs, in the format of
slot-number-list = { slot-number [ to slot-number ] }&<1-8>. The slot-number argument specifies the number
of the slot that holds the card. &<1-8> indicates that you can specify up to eight slot numbers or number
ranges. When you use to to specify a slot number range, the end slot number must be equal to or greater
than the start slot number. (In standalone mode.)
chassis chassis-number slot slot-number-list: Specifies a slot number list of cards that holds the source
CPUs on the specified IRF member device. The chassis-number argument specifies the ID of the IRF
member device. The slot-number-list argument specifies a list containing multiple numbers of slots that
hold the cards, in the format of slot-number-list = { slot-number [ to slot-number ] }&<1-8>. &<1-8>
indicates that you can specify up to eight slot numbers or number ranges. When you to to specify a slot
number range, the end slot number must be equal to or greater than the start slot number. (In IRF mode.)
both: Mirrors both received and sent packets on the specified CPUs.
inbound: Mirrors only received packets on the specified CPUs.
outbound: Mirrors only sent packets on the specified CPUs.
Usage guidelines
You can configure source CPUs only for a local mirroring group or remote source group but not for a
remote destination group.