R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

53
Parameters
level severity: Specifies a severity level in the range of 0 to 7. Without this keyword, the command
displays log information of all levels in the log buffer. For more information about log levels, see Table 13.
slot slo
t-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument specifies the ID of the member device. The slot-number argument specifies the slot number of
the card. (In IRF mode.)
Examples
# (In standalone mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
SLOT EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 16 0 1 0
# (In IRF mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
CHASSIS SLOT EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
1 0 0 0 0 1 238 0 1 0
1 1 0 0 0 0 0 0 0 0
1 2 0 0 0 0 1 0 0 0
2 0 0 0 0 0 5 0 0 0
2 1 0 0 0 0 1 0 0 0
Table 15 Command output
Field Descri
p
tion
CHASSIS IRF member device ID. (In IRF mode.)
SLOT Slot number of the card.
EMERG Represents emergency. For more information, see Table 13.
ALERT Represents alert. For more information, see Table 13.
CRIT Represents critical. For more information, see Table 13.
ERROR Represents error. For more information, see Table 13.
WARN Represents warning. For more information, see Table 13.
NOTIF Represents notification. For more information, see Table 13.
INFO Represents informational. For more information, see Table 13.
DEBUG Represents debug. For more information, see Table 13.
display logfile summary
Use display logfile summary to display the log file configuration.
Syntax
display logfile summary