R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

72
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode and only an
SNMPv3 group name in FIPS mode, a case-sensitive string of 1 to 32 characters.
Usage guidelines
If no group is specified, this command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Table 19 Command output
Field Descri
p
tion
Group name SNMP group name.
Security model
Security model of the SNMP group:
• authPriv—authentication with privacy.
• authNoPriv—authentication without privacy.
• noAuthNoPriv—no authentication, no privacy.
Security model of an SNMPv1 or SNMPv2c group can only be noAuthNoPriv.
Readview Read-only MIB view accessible to the SNMP group.
Writeview Write MIB view accessible to the SNMP group.
Notifyview
Notify MIB view for the SNMP group. The SNMP users in the group can send notifications
only for the nodes in the notify MIB view.
Storage-type
Storage type, including volatile, nonvolatile, permanent, readOnly, and other (see Table
18).
Related commands
snmp-agent group
display snmp-agent local-engineid
Use display snmp-agent local-engineid to display the local SNMP engine ID.
Syntax
display snmp-agent local-engineid
Views
Any view
Predefined user roles
network-admin