R21xx-HP FlexFabric 11900 Network Management and Monitoring Command Reference

83
Examples
# Use the local engine and the SHA-1 algorithm to convert the plaintext key authkey to a ciphertext key.
<Sysname> system-view
[Sysname] snmp-agent calculate-password authkey mode sha local-engineid
The encrypted key is: 09659EC5A9AE91BA189E5845E1DDE0CC
Related commands
• snmp-agent local-engineid
• snmp-agent usm-user v3
snmp-agent community
Use snmp-agent community to configure an SNMP community.
Use undo snmp-agent community to delete an SNMP community.
Syntax
snmp-agent community { read | write } community-name [ mib-view view-name ] [ acl acl-number | acl
ipv6 ipv6-acl-number ] *
undo snmp-agent community { read | write } community-name
Default
No SNMP community exists.
Views
System view
Predefined user roles
network-admin
Parameters
read: Assigns the specified community the read only access to MIB objects. A read-only community can
only inquire MIB information.
write: Assigns the specified community the read and write access to MIB objects. A read and write
community can configure MIB information.
community-name: Sets a community name, a string of 1 to 32 characters.
mib-view view-name: Specifies the MIB view available for the community. The view-name argument
represents a MIB view name, a string of 1 to 32 characters. A MIB view represents a set of accessible
MIB objects. If no MIB view is specified, the specified community can access the MIB objects in the
default MIB view ViewDefault.
acl acl-number: Specifies a basic IPv4 ACL to filter NMSs by source IPv4 address. The acl-number
argument represents an ACL number in the range of 2000 to 2999. In the specified community, only
NMSs with an IPv4 address permitted in the ACL can access the SNMP agent. If no ACL is specified, the
specified ACL does not exist, or the specified ACL does not have any rules, any NMS in the SNMP
community can access the SNMP agent. For detailed information about ACL, see ACL and QoS
Configuration Guide.
acl ipv6 ipv6-acl-number: Specifies a basic IPv6 ACL to filter NMSs by source IPv6 address. The
ipv6-acl-number argument represents an ACL number in the range of 2000 to 2999. In the specified
community, only NMSs with an IPv6 address permitted in the IPv6 ACL can access the SNMP agent. If