R21xx-HP FlexFabric 11900 Network Management and Monitoring Configuration Guide

132
Tasks at a
g
lance
(Required.) Applying a QoS policy:
• Applying a QoS policy to an interface
• Applying a QoS policy to a VLAN
• Applying a QoS policy globally
Configuring match criteria
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and enter class
view.
traffic classifier tcl-name [ operator
{ and | or } ]
By default, no traffic class exists.
3. Configure match criteria.
if-match match-criteria
By default, no match criterion is
configured in a traffic class.
Configuring a traffic behavior
To configure a traffic behavior:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name
By default, no traffic behavior
exists.
3. Specify a mirroring
destination for the traffic
behavior.
• Mirror traffic to an interface:
mirror-to interface
interface-type interface-number
• Mirror traffic to a CPU:
mirror-to cpu
By default, no mirroring destination
is configured for a traffic behavior.
The CPU resides in the card configured with traffic mirroring.
NOTE:
A
fter you configure a traffic behavior, you can use the display traffic behavior command in any view to
v
iew traffic behavior confi
g
uration.
Configuring a QoS policy
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a QoS policy and
enter the QoS policy view.
qos policy policy-name By default, no QoS policy exists.
3. Associate a class with a traffic
behavior in the QoS policy.
classifier tcl-name behavior
behavior-name
By default, no traffic behavior is
associated with a class.