R21xx-HP FlexFabric 11900 Network Management and Monitoring Configuration Guide

89
Configuring the saving of NQA history records
Perform this task to enable the system to save the history records of NQA operations. To display NQA
history records, use the display nqa history command.
This task also configures the following parameters:
• Lifetime of the history records—A record is deleted when its lifetime is reached.
• Maximum number of history records for an NQA operation—If the maxim number is reached, the
earliest history records are deleted.
To configure the saving of history records function:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name operation-tag
By default, no NQA operation
is created.
3. Enter NQA operation type
view.
type { icmp-echo | udp-echo } N/A
4. Enable the saving of history
records for the NQA
operation.
history-record enable
By default, this feature is not
enabled.
5. (Optional.) Set the lifetime of
history records.
history-record keep-time keep-time
By default setting is 120
minutes.
6. (Optional.) Specify the
maximum number of history
records that can be saved.
history-record number number The default setting is 50.
Scheduling the NQA operation on the NQA client
The NQA operation works between the specified start time and the end time (the start time plus
operation duration). If the specified start time is ahead of the system time, the operation starts
immediately. If both the specified start and end time are ahead of the system time, the operation does not
start. To view the current system time, use the display clock command.
Follow these guidelines when you schedule the NQA operation:
• You cannot enter the operation type view or the operation view of a scheduled NQA operation.
• After you configure the scheduling parameters for the operation, you cannot enter NQA operation
view or any operation type view. You cannot deploy any NQA operation related parameters
through IMC either. To modify the operation settings, you must first stop the operation.
• A system time adjustment does not affect started or completed NQA operations. It only affects the
NQA operations that have not started.
To schedule the NQA operation on the NQA client:
Ste
p
Command
1. Enter system view.
system-view