R21xx-HP FlexFabric 11900 OAA Configuration Guide

3
Ste
p
Command Remarks
2. Set the client monitoring timer.
oap timer monitor seconds
By default, the client monitoring
timer is set to 5 seconds.
Restarting an OAP client
Ste
p
Command
1. Enter system view.
system-view
2. Restart an OAP client.
oap client reboot client-id
Shutting down an OAP client
This feature applies only to OAP clients on Linux.
To shut down an OAP client:
Ste
p
Command
1. Enter system view.
system-view
2. Shut down an OAP client.
oap client close client-id