R21xx-HP FlexFabric 11900 Security Command Reference

173
...
Table 23 Command output
Field Descri
p
tion
State
State of an interface:
• U—ARP untrusted interface.
• T—ARP trusted interface.
Interface(State) Inbound interface of ARP packets. State specifies the port state, trusted or untrusted.
IP Number of ARP packets discarded due to invalid source and destination IP addresses.
Src-MAC Number of ARP packets discarded due to invalid source MAC address.
Dst-MAC Number of ARP packets discarded due to invalid destination MAC address.
Inspect Number of ARP packets failed to pass user validity check.
reset arp detection statistics
Use reset arp detection statistics to clear ARP detection statistics.
Syntax
reset arp detection statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Clears the ARP detection statistics for the specified interface.
Usage guidelines
If no interface is specified, the statistics of all the interfaces will be cleared.
Examples
# Clear the ARP detection statistics of all the interfaces.
<Sysname> reset arp detection statistics
ARP automatic scanning and fixed ARP commands
arp fixup
Use arp fixup to change the existing dynamic ARP entries into static ARP entries. You can use this
command again to change the dynamic ARP entries learned later into static.
Syntax
arp fixup
Views
System view