R21xx-HP FlexFabric 11900 Security Command Reference

217
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Predefined user roles
network-admin
Parameters
transform-set-name: Specifies a name for the IPsec transform set, a case-sensitive string of 1 to 63
characters.
Usage guidelines
An IPsec transform set, part of an IPsec policy, defines the security parameters for IPsec SA negotiation,
including the security protocol, and the encryption and authentication algorithms.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-transform-set-tran1]
Related commands
display ipsec transform-set
local-address
Use local-address to configure the local IP address for the IPsec tunnel.
Use undo local-address to restore the default.
Syntax
local-address { ipv4-address | ipv6 ipv6-address }
undo local-address
Default
The primary IPv4 address of the interface to which the IPsec policy is applied is used as the local IPv4
address, and the first IPv6 address of the interface to which the IPsec policy is applied is used as the local
IPv6 address.
Views
IPsec policy view, IPsec policy template view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the local IPv4 address for the IPsec tunnel.
ipv6 ipv6-address: Specifies the local IPv6 address for the IPsec tunnel.