R21xx-HP FlexFabric 11900 Security Command Reference

47
• state primary
timer quiet (RADIUS scheme view)
Use timer quiet to set the quiet timer for the servers specified in an RADIUS scheme.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet period is 5 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes: Server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
Make sure the server quiet timer is set correctly. Too short a quiet timer might result in frequent
authentication or accounting failures because the device keeps attempting to communicate with an
unreachable server that is in active state.
Examples
# Set the quiet timer for the servers to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer quiet 10
Related commands
display radius scheme
timer realtime-accounting (RADIUS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view