R21xx-HP FlexFabric 11900 Security Configuration Guide

93
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+
...+.................+..........+...+.
# Enable the SSH server function.
[Switch] ssh server enable
# Assign an IP address to VLAN-interface 2, which the Stelnet client will use as the destination for
SSH connection.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ip address 192.168.1.40 255.255.255.0
[Switch-Vlan-interface2] quit
# Set the authentication mode for the user interfaces to AAA.
[Switch] user-interface vty 0 15
[Switch-ui-vty0-15] authentication-mode scheme
[Switch-ui-vty0-15] quit
# Create a local device management user client001 with the plaintext password aabbcc, the
service type ssh, and the user role network-admin
[Switch] local-user client001 class manage
[Switch-luser-manage-client001] password simple aabbcc
[Switch-luser-manage-client001] service-type ssh
[Switch-luser-manage-client001] authorization-attribute user-role network-admin
[Switch-luser-manage-client001] quit
# (Optional.) Create the SSH user client001 with the service type stelnet, and the authentication
method password.
[Switch] ssh user client001 service-type stelnet authentication-type password
2. Establish a connection to the Stelnet server:
There are a variety of Stelnet client software, such as PuTTY, and OpenSSH. This example uses an
Stelnet client that runs PuTTY Version 0.58.
To establish a connection to the Stelnet server:
a. Launch PuTTY.exe to enter the interface shown in Figure 25.
b. In the Host Name (or IP address) field, enter the IP address (192.168.1.40) of the Stelnet
server.