R21xx-HP FlexFabric 11900 Series High Availability Command Reference

48
Field Descri
p
tion
MAC Status
State of the interface indicated by the last CCM received from the remote
MEP:
• UP—The interface is ready to pass packets.
• DOWN—The interface cannot pass packets.
• TESTING—The interface is in some test mode.
• UNKNOWN—The interface status cannot be determined.
• DORMANT—The interface is not in a state to pass packets. Instead, it is in
a pending state, waiting for some external event.
• NOT-PRESENT—Some component of the interface is missing.
• LLD—The interface is down due to state of the lower layer interfaces.
If this field is not supported, a hyphen (-) is displayed.
display cfd service-instance
Use display cfd service-instance to display the configuration information of service instance.
Syntax
display cfd service-instance [ instance-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id: Service instance ID in the range of 1 to 32767. If this argument is not specified, the
configuration information of all service instances is displayed.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance
Service instances configured (2 in total):
Service instance 5:
Maintenance domain: md_5
Maintenance domain index: 5
Maintenance association: ma_5
Maintenance association index: 5
Level: 5 VLAN: 5 MIP rule: NONE CCM interval: 1s Direction: Inbound
MEP ID: 730 Interface: Ten-GigabitEthernet1/0/1
Service instance 6:
Maintenance domain: (Without ID)
Maintenance domain index: 6
Maintenance association: ma_6
Maintenance association index: 6