R21xx-HP FlexFabric 11900 Series High Availability Command Reference

73
verbose: Displays detailed IPv6 VRRP group information. If the verbose keyword is not specified, this
command displays brief IPv6 VRRP group information.
Usage guidelines
If no interface or VRRP group is specified, this command displays the states of all IPv6 VRRP groups. If
only an interface is specified, this command displays the states of all IPv6 VRRP groups on the specified
interface. If both an interface and an IPv6 VRRP group are specified, this command displays the states of
the specified IPv6 VRRP group on the specified interface.
Examples
# Display brief information about all IPv6 VRRP groups on the device when VRRP operates in standard
mode.
<Sysname> display vrrp ipv6
IPv6 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 1
Interface VRID State Running Adver Auth Virtual
Pri Timer Type IP
---------------------------------------------------------------------
Vlan2 1 Master 150 100 None FE80::1
Table 21 Command output (in standard mode)
Field Descri
p
tion
Running Mode VRRP operating mode (standard mode).
Total number of virtual routers Total number of VRRP groups.
Interface Interface where the VRRP group is configured.
VRID Virtual router ID (VRRP group number).
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
• Inactive.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router’s priority changes when the track entry’s status changes.
Adver Timer VRRP advertisement sending interval in centiseconds.
Auth Type
Authentication type. Only "none" is available. That is, no authentication is
required.
Virtual IP Virtual IP address of the VRRP group.
# Display detailed information about all IPv6 VRRP groups on the device when VRRP operates in
standard mode.
<Sysname> display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode : Standard