R21xx-HP FlexFabric 11900 Series High Availability Command Reference

80
vrrp ipv6 vrid timer advertise
Use vrrp ipv6 vrid timer advertise to configure the interval at which the master in an IPv6 VRRP group
sends VRRP advertisements.
Use undo vrrp ipv6 vrid timer advertise to restore the default.
Syntax
vrrp ipv6 vrid virtual-router-id timer advertise adver-interval
undo vrrp ipv6 vrid virtual-router-id timer advertise
Default
The master in an IPv6 VRRP group sends VRRP advertisements at an interval of 100 centiseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.
adver-interval: Specifies an interval at which the master in the specified IPv6 VRRP group sends VRRP
advertisements. The value range for the adver-interval argument is 10 to 4095 centiseconds.
Usage guidelines
The master in an IPv6 VRRP group periodically sends VRRP advertisements to declare its presence. You
can use this command to configure the interval at which the master sends VRRP advertisements.
The routers in an IPv6 VRRP group can have different intervals for sending VRRP advertisements. The
master in the VRRP group sends VRRP advertisements at the specified interval and carries the interval
attribute in the advertisements. After a backup receives the advertisement, it records the interval in the
advertisement. If the backup does not receive a new VRRP advertisement from the master when the timer
(3 × VRRP advertisement sending interval + Skew_Time) expires, it regards the master as failed and takes
over as the master.
HP recommends that you set the VRRP advertisement interval to be greater than 100 centiseconds to
maintain system stability.
Large network traffic might disable a backup from receiving VRRP advertisements from the master within
the specified time and trigger an unexpected master switchover. To solve this problem, you can use this
command to configure a larger interval.
Examples
# Configure the master in IPv6 VRRP group 1 to send VRRP advertisements at an interval of 500
centiseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp ipv6 vrid 1 timer advertise 500
Related commands
display vrrp ipv6