R21xx-HP FlexFabric 11900 TRILL Command Reference

9
Predefined user roles
network-admin
network-operator
Parameters
vlan vsan-id: Displays the information in the VLAN specified by its VLAN ID. The vlan-id argument is in
the range of 1 to 4094. If no VLAN is specified, the command displays information about all VLANs.
local-entry: Displays information about local ingress entries. The frames sent out of the ports in the local
ingress entries do not need the TRILL encapsulation.
remote-entry: Displays information about remote ingress entries. The frames sent out of the ports in the
remote ingress entries need the TRILL encapsulation.
Usage guidelines
If neither local-entry or remote-entry is specified, this command displays information about local and
remote ingress entries.
Examples
# Display all ingress entries in the TRILL MFIB.
<Sysname> display trill mfib ingress
======================================================================
Ingress type: Local entry
VLAN ID: 1
Ports:
XGE1/0/1
======================================================================
Ingress type: Remote entry
VLAN ID: 1
RootNickName: 0x5092
Ports:
XGE1/0/2
Table 7 Command output
Field Descri
p
tion
Ingress type
Type of ingress entries:
• Local entry.
• Remote entry.
VLAN ID VLAN ID of the entry.
RootNickName Nickname of the root bridge.
Ports Ports of the entry.
display trill mfib transit
Use display trill mfib transit to display the information about egress entries in the TRILL MFIB.