R21xx-HP FlexFabric 11900 TRILL Command Reference

11
Table 8 Command output
Field Descri
p
tion
Transit type
Type of egress entries:
• RB entry.
• RPF entry.
• VLAN RB entry—RB entries of the specified VLAN.
• MAC VLAN RB entry—RB entries of the specified VLAN and MAC address.
RootNickName Nickname of the root bridge.
InNickName Nickname of the ingress RB of the entry.
VLAN ID VLAN ID of the entry.
MAC address MAC address of the entry.
Flag
Entry type:
• Egress—Egress entries.
• Transit—Transit entries.
• Egress/Transit—Both transit and egress entries.
Port/Ports Ports of the entry.
display trill multicast-route
Use display trill multicast-route to display the TRILL multicast routing table information, which includes the
next-hop outgoing port list for multicast frames, broadcast frames, and unknown unicast frames based on
the multicast distribution trees.
Syntax
display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac-address mac-address ] ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tree-root nickname: Displays the TRILL multicast routing table information for the distribution tree rooted
at the specified RB. The nickname argument is a hexadecimal number in the range of 0x0 to 0xFFFF. If
this option is not specified, the command displays information about the TRILL multicast routing table.
vlan vlan-list: Displays the information within the specified VLAN. The vlan-list argument specifies
multiple VLANs in the form of { vlan-id [ to vlan-id ] }&<1-10>, where vlan-id is a VLAN ID in the range
of 1 to 4094 and &<1-10> indicates that you can specify up to ten vlan-id [ to vlan-id parameters. If no
VLAN is specified, the command displays information about all VLANs.
mac-address mac-address: Displays information about a specified MAC address. If no MAC address is
specified, the command displays information about all MAC addresses.
Examples
# Display all information about the TRILL multicast routing table.