R21xx-HP FlexFabric 11900 TRILL Command Reference

14
display trill peer
Use display trill peer to display the TRILL neighbor statistics.
Syntax
display trill peer [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no interface
is specified, the command displays information about all interfaces.
Examples
# Display the TRILL neighbor statistics of interface Ten-GigabitEthernet 1/0/1.
<Sysname> display trill peer interface ten-gigabitethernet 1/0/1
System ID: 00e0.fc58.123a
Interface: Ten-GigabitEthernet1/0/1
Circuit ID: 00e0.fc58.123a.01
State: Up
HoldTime: 8s
DRB priority: 64
Nickname: 0x899b
Uptime: 00:38:15
Table 11 Command output
Field Descri
p
tion
System ID System ID of the neighbor.
Interface Local TRILL port directly connected to the neighbor.
Circuit ID LSP number of the pseudo node.
State
Neighbor state:
• Up.
• Down.
Holdtime
Remaining holding time (in seconds) of the adjacency. If no Hello frame is received from
a neighbor within the holding time, the neighbor is considered invalid. When a Hello
frame is received from a neighbor within the holding time, the holding time is restarted.
DRB priority DRB priority of the neighbor port.
Nickname Nickname of the neighbor.
Uptime Time for which the adjacency has been held.