7500 20G Unified Wired-WLAN Module Basic Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP FlexFabric 11000 Switch Products

Ste

Command

Remarks

7. Exit from Ethernet interface

view.

quit N/A

8. Enter view of the aggregate

interface that connects the

module to the switch.

interface bridge-aggregation

interface-number

N/A

9. Set the link type of the

interface to trunk.

port link-type trunk N/A

10. Assign the trunk interface to

the specified VLANs.

port trunk permit vlan { vlan-id-list

| all }

By default, a trunk interface allows

only packets from VLAN 1 to pass

through.

Configuration example

Network requirements

Insert a 11900/10500/7500 20G unified wired-WLAN module in slot 4 of the switch. Packets on VLAN

1, and VLAN 8 through VLAN 10 are permitted to transfer between the switch and the module. By default,

packets on VLAN 1 are permitted to transfer between the module and the switch.

Configuration procedure

1. Configure the switch (with the module inserted in slot 4):

<Switch>system-view

# Create VLAN 8 through VLAN 10.

[Switch]vlan 8 to 10

# Configure the link type of the Ten-GigabitEthernet 4/0/1 interface of the switch as trunk and

assign the interface to aggregation group 1.

[Switch]interface Ten-gigabitethernet4/0/1

[Switch-Ten-GigabitEthernet4/0/1]port link-type trunk

[Switch-Ten-GigabitEthernet4/0/1]port link-aggregation group 1

[Switch-Ten-GigabitEthernet4/0/1]quit

# Configure the link type of the Ten-GigabitEthernet4/0/2 interface of the switch as trunk and

assign the interface to aggregation group 1.

[Switch]interface Ten-gigabitethernet4/0/2

[Switch-Ten-GigabitEthernet4/0/2]port link-type trunk

[Switch-Ten-GigabitEthernet4/0/2]port link-aggregation group 1

[Switch-Ten-GigabitEthernet4/0/2]quit

# Assign aggregate interface BAGG1 to VLANs 8 through 10.

[Switch]interface Bridge-Aggregation 1

[Switch-Bridge-Aggregation1]port link-type trunk

[Switch-Bridge-Aggregation1]port trunk permit vlan 8 to 10

[Switch-Bridge-Aggregation1]return

2. Configure the 11900/10500/7500 20G unified wired-WLAN module:

# Log in to the module through OAP.

<Switch>oap connect slot4

<AC>system-view