HP FlexFabric 5930 Switch Series About the HP FlexFabric 5930 Configuration Guide Part number: 5998-4561 Software version: Release 2406 & Release 2407P01 Document version: 6W101-20140404
Legal and notice information © Copyright 2014 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
About the HP FlexFabric 5930 configuration guides The HP FlexFabric 5930 configuration guides describe the software features for the HP FlexFabric 5930 Series Switches, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.
Configuration guide Content Describes how to configure ARP, IP addressing, IP performance optimization, IP forwarding basics, IPv6 basics, DHCP, DNS, UDP helper, tunneling and GRE.
Configuration guide Content Describes how to classify traffic with ACLs, and allocate network resources and manage congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help other function modules (such as QoS and IP routing) classify or filter traffic.
Configuration guide Content Describes features that help you manage and monitor your network, for example, manage system events, and test network connectivity.
