HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 111
NOTE: The HAFM appliance interprets trap data and displays the proper port value for all
firmware levels. When traps are generated on the switch, firmware versions 4.0 and below send the
actual port number and firmware versions 5.X and above add one to the port number to match the
specification. However, third party applications cannot correctly interpret the information.
4. Click OK to close the Add Trap Recipient dialog box.
5. Click OK to close the Configure Trap Forwarding dialog box.
Removing trap recipients
To remove a trap recipient:
1. Select Monitor > Trap Forwarding.
The Configure Trap Forwarding dialog box is displayed (Figure 64).
2. Highlight the recipient you want to remove from the Available Recipients list.
3. Click Remove.
4. Click OK.