HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Optional HAFM features148
3. Select one of the following options:
• Start with discovered topology—Use the discovered topology as the basis for the new plan.
• Start Empty—Start the new plan with an empty topology.
4. Click OK.
Opening a plan
To open a plan:
1. Select SAN > Open Plan from the Planning window menu (or press Ctrl-O).
The Open Plan dialog box is displayed (Figure 93).
Figure 93 Open Plan dialog box
2. Select a plan from the Open Plan list.
3. Click OK.
Adding devices
You can add one device or multiple devices to the plan.
Adding one device
To add one device:
1. Click a device icon on the devices toolbox.
2. Click the Physical Map in the Planning window.
The new planned device icon is displayed on the Physical Map.
Adding multiple devices
To add multiple devices:
1. Click the devices icon on the devices toolbox.
The Insert Multiple Devices dialog box is displayed (Figure 94).
Figure 94 Insert Multiple Devices dialog box
2. Enter a quantity for each device type you want to add.
3. Click OK.