HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 149
Arranging devices
After adding devices to your plan, you can rearrange them
To rearrange a device:
1. Click the Select Devices icon ( ) on the devices toolbox.
2. Click a planned device icon and drag it to the desired location.
3. Repeat as necessary.
Connecting devices
To connect the devices:
1. Click the Connect Devices icon ( ) on the devices toolbox.
2. Click a device on the Physical Map.
A connection is created and associated with the first available port on the device.
3. Click another device on the Physical Map.
The connection is associated with the first available port on the second device. A connection is
displayed between the two devices.
4. If you want to make multiple connections, click the Connect Devices icon ( ), hold down the
Shift key, and click each device you want to connect.
Configuring devices
To specify properties for planned devices:
1. Right-click a planned device icon on the Physical Map and select Properties.
The planned device’s Properties dialog box is displayed (Figure 95).
Figure 95 Planned device Properties dialog box
2. Enter a nickname for the device in the Nickname field (optional).
3. Enter or edit information.
4. Click OK.