HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 229
Invalid World Wide
Name. Valid WWN
format is: xx:xx:xx:xx:xx:
xx:xx:xx.
The specified WWN
format is invalid. The
valid format is eight
two-digit hexadecimal
numbers separated by
colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Retry the operation using a valid
WWN or nickname.
Invalid zone in zone set. The defined zone no
longer exists and is
invalid.
Delete the invalid zone from the
zone set.
Limit exceeded. You cannot add a new
product or user to HAFM
application if the
maximum number of that
resource already exists on
the system.
Delete unneeded products or users
from the system, before attempting
to add any new ones.
No address selected. You cannot complete the
operation because an
address has not been
selected.
Choose an address and retry the
operation.
No attached nodes
selected.
An operation was
attempted without an
attached node selected.
Choose an attached node and try
the operation again.
No management server
specified.
An HAFM appliance is
not defined to the HAFM
application.
At the HAFM Log In dialog box,
type an appliance name in the
Server Name field and click Login.
No nickname selected. No nickname was
selected when the
command was attempted.
Choose a nickname and try again.
No Element Managers
installed.
No director or switch
Element Manager is
installed on this
workstation.
Install the appropriate Element
Manager to this workstation.
No routing information
available.
No information is
available for the route
selected.
Choose a different route and try
the operation again.
No user selected. A user was not selected
when the command was
attempted.
Choose a user and try again.
Table 29 HAFM messages (continued)
Message Description Action