HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Reference282
When you right-click near the cursor in a text area, a menu of the context property sets is displayed.
Select one of the choices to see a list of the available context properties. Select one of the properties
to insert a bracketed macro at the cursor.
When the trigger fires, the values for the context properties that you selected are inserted into the
text in place of the macro. Write the text in such a way that you know what the value is since the
property name is not inserted along with the value. Example: “The device labeled
${PROPlabel} has come back online. Its Node Name is ${PROPnodename}”.
NOTE: Actions that are triggered by a schedule trigger do not have access to Device and Event
properties since no device is directly involved in triggering the policy.
Table 49 describes event context properties.
Table 49 Event context properties
Property Description
Device Status Status of the device (online or offline)
Discovery Type In-band or out-of-band discovery
Element Type A device status event or a link status event
Threshold Type Performance threshold type (for example, high critical)
Measure Type Performance measurement units
Port Number Port number that encountered an event
IP Address IP address of the device that encountered an event
Source Label of the device that encountered an event
Node Name WWN of the device that encountered an event
Port Name World-wide name of the port that encountered an event
Description Description of the event
Event Level Severity level of the event