HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 93
1. Select Monitor > SNMP Agent > Setup.
The SNMP Agent Setup dialog box is displayed (Figure 45 on page 91).
2. Click the Trap Recipients tab.
3. Highlight the trap recipient that you want to remove.
4. Click Remove.
5. Click OK.
Customizing the main window
You can customize the main window by adjusting the level of detail displayed on the Physical Map
or Product List columns. This helps to simplify management of large SANs. This section provides
instructions for customizing the topology layout and creating user-defined views of the SAN.
You can create views that show only certain fabrics. If you discover or import a SAN with more than
2000 devices, the devices display on the Product List, but do not display on the Physical Map.
Instead, the topology area shows a message stating that the topology cannot be displayed. You can
create a new view to filter the number of devices being discovered.
Creating a customized view
To customize the main window:
NOTE: Customized view settings reside on the appliance. All users who log on to the same
appliance can select that view.
1. Do one of the following to open the Create View dialog box:
•Select View > Create View.
•Click the View tab and select Create View.