BLADE OS™ BBI Quick Guide HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1

BLADE OS 5.1 BBI Guide
BMD00116, August 2009 Chapter 2: Browser-Based Interface Basics
 15
Commands
The following general commands are available on the Toolbar:
Apply
Pending configuration changes do not take effect until you click the Apply
command. Once applied, all changes take effect on the switch
immediately. If you do not save the changes, however, they will be lost the
next time the switch is rebooted.
Save
Writes applied configuration changes to non-volatile flash memory on the
switch.
Revert
Removes pending configuration changes made since the last Apply
command.
Diff
Show any pending configuration changes.
Dump
Displays the running configuration of the switch in a separate browser
window.
Show Log
Opens a new Web-browser window for displaying the most recent switch
log messages. Close the log browser when finished.
Help
Displays basic Help information in a separate browser window. Close the
Help window when finished.
Quit
Log off the switch and exit the BBI.