BLADE OS™ BBI Quick Guide HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1

BMD00116, August 2009 19
CHAPTER 3
Configuring the Switch
The Browser-Based Interface (BBI) can be used to view and change switch configuration
parameters. The same configuration parameters that are available through the switch’s
command-line interface are present on the BBI configuration forms.
The following sections provide a basic outline for switch configuration. You should be familiar with
configuration commands as covered in the BLADE OS Command Reference.
Note – You must be logged in using the administrator account in order to change switch
configuration settings.