BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
BMD00114, August 2009 Chapter 6: The Configuration Menu
 199
ldap
Displays the LDAP Authentication Menu. To view menu options, see page 211.
ntp
Displays the Network Time Protocol (NTP) Server Menu. To view menu options, see
page 213.
ssnmp
Displays the System SNMP Menu. To view menu options, see page 214.
access
Displays the System Access Menu. To view menu options, see page 230.
sflow
Displays the sFlow menu. To view menu options, see page 236.
date
Prompts the user for the system date. The date retains its value when the switch is reset.
time
Configures the system time using a 24-hour clock format. The time retains its value when the
switch is reset.
timezone
Configures the time zone where the switch resides. You are prompted to select your location
(continent, country, region) by the timezone wizard. Once a region is selected, the switch
updates the time to reflect local changes to Daylight Savings Time, etc.
olddst enable|disable
Enables or disables use of the Daylight Saving Time (DST) rules in effect prior to the year
2007. The default setting is disabled.
dlight enable|disable
Disables or enables daylight savings time in the system clock. When enabled, the switch will
add an extra hour to the system clock so that it is consistent with the local clock.
The default value is disabled.
Table 88 System Configuration Menu Options (/cfg/sys) (continued)
Command Syntax and Usage