BLADE OS™ Command Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 Command Reference
200
 Chapter 6: The Configuration Menu BMD00114, August 2009
idle <idle timeout in minutes>
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default is 10 minutes.
notice <maximum 1024 character multi-line login notice> <'-' to end>
Displays login notice immediately before the “Enter password:” prompt. This notice can
contain up to 1024 characters and new lines.
bannr <string, maximum 80 characters>
Configures a login banner of up to 80 characters. When a user or administrator logs into the
switch, the login banner is displayed. It is also displayed as part of the output from the
/info/sys command.
hprompt disable|enable
Enables or disables displaying of the host name (system administrator’s name) in the
Command Line Interface (CLI).
bootp disable|enable
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default setting is enabled.
dhcp disable|enable
Enables or disables Dynamic Host Control Protocol for setting the IP address on the
management interface. When enabled, the IP address obtained from the DHCP server
overrides the static IP address. The default setting is enabled.
reminder disable|enable
Enables or disables reminder messages in the CLI. The default setting is enabled.
rstctrl disable|enable
Enables or disables the reset control flag. When enabled, the switch continues to function
after a crash of the main processor, using the last known Layer 2/3 information.
The default setting is enabled.
cur
Displays the current system parameters.
Table 88 System Configuration Menu Options (/cfg/sys) (continued)
Command Syntax and Usage